YOKOGAWA SL1400 - Page 416

13-45
IM 701240-01E
Saving and Loading Data
3
2
1
4
5
6
7
8
9
10
11
12
13
13
14
15
16
17
18
App
Index
Setting Details
• Setting the Scale Value (Only When Displaying the X-Y Waveform)
18. Use jog shuttle+SELECT to turn the scale OFF or ON.
• Setting Whether to Print the Time (Only When Displaying the T-Y Waveform)
19. Use jog shuttle+SELECT to set the time to OFF, 200mm, 400mm, or 800mm.
• Setting Whether to Print the Gauge (Only When Displaying the T-Y Waveform)
20. Use jog shuttle+SELECT to set the gauge to OFF or ON.
• Setting the Annotation (Only When Displaying the T-Y Waveform)
21. Use jog shuttle+SELECT to set the print interval of annotations in the right
column of Annotation to OFF, 200mm, 400mm, or 800mm.
22. Use jog shuttle+SELECT to set the type of annotation to be printed in the right
column of Type to Ch Information, Ch Message, or Ch Data.
If Ch Message is selected, proceed to step 23.
If Ch Information or Ch Data is selected, proceed to step 24.
23. Use jog shuttle+SELECT to select Setup. Then, enter the message you want to
print for the channel using up to 80 characters according to the procedure in
section 4.2.
• Setting Comments
24. Use jog shuttle+SELECT to select Comment. Then, enter the comment text
you want to print using up to 20 characters according to the procedure in section
4.2.
Note
• The comment setting is linked with the PRINT menu > Comment setting.
• When creating a PDF file of the print image while displaying T-Y waveforms, Scale and Ch
Label settings are void.
When Displaying the T-Y Waveform When Displaying the X-Y Waveform
13.14 Creating PDF Files of the Printed Image