Zebra DS457 Series - Host Character Time-out

SSI Interface 8 - 15
Host Character Time-out
Parameter # 239 (SSI # EFh)
This parameter determines the maximum time the imager waits between characters transmitted by the host
before discarding the received data and declaring an error.
To set the delay period (options are 200, 500, 750, or 990 ms), scan one of the following bar codes.
NOTE Other values are available via SSI command.
*Low - 200 ms
(20)
Medium - 500 ms
(50)
High - 750 ms
(75)
Maximum - 990 ms
(99)