Zebra DS457 Series - Time Delay to Presentation Sleep Mode

User Preferences 6 - 13
Time Delay to Presentation Sleep Mode
Parameter # 662 (SSI # F1h 96h)
In Presentation Mode, this parameter sets the time the imager remains active before entering sleep mode with
no illumination. The imager wakes when it senses motion, upon presentation of a bar code, or a trigger pull.
NOTE Imager performance is not guaranteed in dim conditions.
Disable
(0)
1 Second
(1)
10 Seconds
(10)
*1 Minute
(17)
5 Minutes
(21)