Zebra DS457 Series - Composite TLC-39; Composite Inverse

12 - 86 DS457-XX20004ZZWW Fixed Mount Imager Integration Guide
Composite TLC-39
Parameter # 371 (SSI # F0h 73h)
Scan a bar code below to enable or disable Composite bar codes of type TLC-39.
Composite Inverse
Parameter # 1113 (SSI # F8h 04h 59h)
Select an option to set Composite for either regular decode or inverse decode.
• Regular Only - The imager decodes regular Composite bar codes only. Before selecting this, set Inverse
1D on page 12-71 to Regular Only or Inverse Autodetect.
• Inverse Only - The imager decodes inverse Composite bar codes only. This mode only supports
Composite Inverse that includes DataBar combined with CCAB, and does not support other 1D/2D
combinations. Before selecting this, first enable Composite CC-A/B on page 12-85, and set Inverse 1D
on page 12-71 to Inverse Only or Inverse Autodetect.
Enable TLC39
(1)
*Disable TLC39
(0)
*Regular Only
(0)
Inverse Only
(1)