Symbologies 12 - 71
Inverse 1D
Parameter # 586 (SSI # F1h 4Ah)
Scan one of the following bar codes to set the 1D inverse decoder setting:
•
Regular Only - The imager decodes regular 1D bar codes only.
•
Inverse Only - The imager decodes inverse 1D bar codes only.
•
Inverse Autodetect - The imager decodes both regular and inverse 1D bar codes.
NOTE The Inverse 1D setting may impact Composite or Inverse Composite decoding. See Composite Inverse
on page 12-86.
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)
(Default for DS457-DP Only)
To Next Page
Loading...