12 - 26 DS457-XX20004ZZWW Fixed Mount Imager Integration Guide
Bookland ISBN Format
Parameter # 576 (SSI # F1h 40h)
If you enabled Bookland EAN using Enable/Disable Bookland EAN on page 12-12, select one of the following
formats for Bookland data:
•
Bookland ISBN-10 - The imager reports Bookland data starting with 978 in traditional 10-digit format
with the special Bookland check digit for backward-compatibility. Data starting with 979 is not considered
Bookland in this mode.
•
Bookland ISBN-13 - The imager reports Bookland data (starting with either 978 or 979) as EAN-13 in
13-digit format to meet the 2007 ISBN-13 protocol.
*Bookland ISBN-10
(0)
Bookland ISBN-13
(1)
NOTE For Bookland EAN to function properly, first enable Bookland EAN using Enable/Disable Bookland EAN
on page 12-12, then select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN
Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN/JAN Supplementals on
page 12-13.
To Next Page
Loading...