Zebra DS457 Series - PDF Prioritization Timeout; Product ID (PID) Type

User Preferences 6 - 21
PDF Prioritization Timeout
Parameter # 720 (SSI # F1h D0h)
When PDF Prioritization is enabled, this timeout specifies how long the imager attempts to decode a PDF417
symbol before reporting the 1D bar code in the field of view.
Scan the following bar code, then scan four digits from Appendix G, Numeric Bar Codes that specify the
timeout in milliseconds. For example, to enter 200 ms, scan the following bar code, then scan 0200. The range
is 0 to 5000 ms, and the default is 400 ms.
Product ID (PID) Type
Parameter # 1281 (SSI # F8h 05h 01h)
Scan one of the following bar codes to define the PID value reported in USB enumeration.
NOTE PDF Prioritization Timeout must be at least one second lower than the Decode Session Timeout.
PDF Prioritization Timeout
*Host Type Unique
(0)
Product Unique
(1)
IBM Unique
(2)