Zebra MC33 Series Integrator Guide

Settings
156
Additional Wi-Fi Settings
Use the Additional Settings to configure additional Wi-Fi settings. From the Wi-Fi screen, touch > Additional
settings to view the additional Wi-Fi settings.
• Regulatory
• Country selection - Displays the acquired country code if 802.11d is enabled else it displays the
currently selected country code.
• Region code - Displays the current region code.
• Band and Channel Selection
• Wi-Fi frequency band - Use to select the frequency band. Options: Auto (default), 5 GHz only or 2.4
GHz only.
• Available channels (2.4 GHz) - Use to select specific channels. Touch to display the Available
channels menu. Select specific channels. Touch OK.
• Available channels (5 GHz) - Use to select specific channels. Touch to display the Available
channels menu. Select specific channels. Touch OK.
• Logging
• Advanced Logging – Touch to enable advanced logging. Advanced logging
• Wireless logs - Use to capture Wi-Fi log files.
• Fusion Logger - Touch to open the Fusion Logger application. This application maintains a
history of high level WLAN events which helps to understand the status of connectivity.
NOTE: Additional Wi-Fi settings are for the device not for a specific wireless network.

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C