Zebra MC33 Series Integrator Guide

Accessories
89
Figure 72 Remove Cross-body Strap
2. Place the Belt Clip on a belt or waistband.
Figure 73 Belt Clip Lanyard
Charging the MC33XX with the Lanyard
To charge the MC33XX when using the lanyard:
1. Press the Quick Release Button on the Retractor.
2. Place the MC33XX in the charging cradle.
The Device to Retractor Interface remains attached to the MC33XX, while charging.

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C