Zebra MC33 Series Integrator Guide

Settings
176
About Phone
Use About phone settings to view information about the MC33XX. Swipe down with two fingers from the status bar
to open the quick access panel and then touch > About phone.
• Status - Touch to display the following:
• Battery status - Indicates if the battery is charging (on AC power) or discharging (on battery power).
• Battery level - Indicates the battery charge level.
• IP address - Displays the IP address of the device.
• Wi-Fi MAC address - Displays the Wi-Fi radio MAC address.
• Ethernet MAC address - Displays the Ethernet driver MAC address.
• Bluetooth address - Displays the Bluetooth radio Bluetooth address.
• Serial number - Displays the serial number of the device.
• Up time - Displays the time that the MC33XX has been running since being turned on.
• Battery Information - Displays information about the battery.
• SW components - Lists filenames and versions for various software on the MC33XX.
• Legal information - Opens a screen to view legal information about the software included on the
MC33XX.
• Model - Displays the devices model number.
• Android version - Displays the operating system version.
• Android security patch level - Displays the security patch level date.
• Kernel version - Displays the kernel version.
• Build fingerprint - Defines Device Manufacturer, Model, Android version and Build version together in
one location.
• Device update version - Displays the patch version if any updates are installed on top of the base build.
• Build Number - Displays the software build number.

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C