Zebra MC33 Series - Options Menu; Disabling DataWedge; Creating a New Profile

Datawedge Configuration
98
Options Menu
Touch to open the options menu.
Figure 80 DataWedge Options Menu
The menu provides options to create a new profile, access to general DataWedge settings and DataWedge version
information.
Disabling DataWedge
1. Swipe up from the bottom of the screen and touch .
2. Touch .
3. Touch Settings.
4. Touch DataWedge enabled.
The blue check disappears from the checkbox indicating that DataWedge is disabled.
Creating a New Profile
To create a new profile:
1. Swipe up from the bottom of the screen and touch .
2. Touch .
3. Touch New profile.
4. In the New profile dialog box, enter a name for the new profile. It is recommended that profile names be
unique and made up of only alpha-numeric characters (A-Z, a-z, 0-9).
Figure 81 New Profile Name Dialog Box
5. Touch OK.
The new profile name appears in the DataWedge profile screen.