Zebra MC33 Series Integrator Guide

Accessories
48
5-Slot Ethernet ShareCradle with 4-Slot Battery Charger
The 5-Slot Ethernet ShareCradle with 4-Slot Battery Charger:
• Provides 9 VDC power for operating the mobile computer and charging the battery.
• Provides 4.2 VDC power for charging spare batteries.
• Simultaneously charges up to five mobile computers and four spare batteries.
• Compatible with the following batteries:
• MC33XX 2740 mAh PowerPrecision+ standard battery.
• MC33XX 5200 mAh PowerPrecision+ extended battery.
• MC32N0 2740 mAh PowerPrecision standard battery.
• MC32N0 5200 mAh PowerPrecision extended battery.
Figure 21 5-Slot Ethernet ShareCradle with 4-Slot Battery Charger Setup
Charging the MC33XX Battery
1. Ensure that the cradle is connected to power.
CAUTION: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page
214
AC Line Cord
DC Line Cord
Power Supply
Primary Port
Ethernet Cable
Router
NOTE: To function properly, remove the lower part of the rubber boot or the entire rubber boot before placing in
a charging cradle.

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C