Zebra MC33 Series - MC33 XX-G Rubber Boot

Accessories
65
MC33XX-G Rubber Boot
The rubber boot provides additional protection to the MC33XX-G.
To attach the rubber boot:
1. Slide the top of the MC33XX-G into the top of the rubber boot.
Figure 36 Attach Top of Rubber Boot
2. Grasp the bottom of the rubber boot and place over the bottom of the MC33XX-G.
Figure 37 Attach Bottom of Rubber Boot
NOTE: To function properly, remove the lower part of the rubber boot or the entire rubber boot before placing in
a charging cradle.