Zebra MC33 Series Integrator Guide

USB Communication
91
Figure 74 Use USB Dialog Box
3. Touch Transfer files.
4. On the host computer, open a file explorer application.
5. Locate the MC33XX as a portable device.
6. Open the SD card or the Internal storage folder.
7. Copy files to and from the MC33XX or delete files as required.
Transferring Files using Photo Transfer Protocol
1. Connect the USB Charge cable to the MC33XX and then to the host computer or place the MC33XX into the
1-Slot Charge cradle.
2. Pull down the Notification panel and touch USB charging this device.
Figure 75 Use USB Dialog Box
3. Touch Transfer photos (PTP).
4. On the host computer, open a file explorer application.
5. Open the SD card or the Internal storage folder.
NOTE: Use Photo Transfer Protocol (PTP) to copy photos from either the microSD card or internal memory
to the host computer.

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C