Zebra MC33 Series Integrator Guide

Technical Specifications
239
SE4750-SR Decode Zone
The table below lists the typical distances for selected barcode densities. The minimum element width (or “symbol
density”) is the width in mils of the narrowest element (bar or space) in the symbol.
15 mil
Code 128
1234
80% MRD
1.0 in
2.54 cm
Note 3
29.5 in
74.93 cm
20 mil
Code 39
123
80% MRD
1.4 in
3.56 cm
Note 3
52.0 in
132.08 cm
55 mil
Code 39
CD
80% MRD
31.4 in
8.64 cm
Note 3
100.0 in
254.0 cm
100 mil
Code 39
123456
80% MRD
2.0 ft
60.96 cm
Note 3
17 ft
518.16 cm
NOTE: Contrast is measured as Mean Reflective Difference (MRD) at 650 nm.
Working range specifications at temperature = 23°C, pitch=18°, roll=0°, skew=0°, photographic quality, ambient
light ~150 ft-c, humidity 45-70% RH.
Dependent upon width of barcode.
Distances measured from front edge of scan engine chassis.
Table 22 SE965 Decode Distances (Continued)
Symbol Density/
Barcode Type
Barcode Content/ Contrast
Note 1
Typical Working Ranges
Near Far
Table 23 SE4750-SR Decode Distances
Symbol Density/ Barcode Type
Typical Working Ranges
Near Far
3.0 mil
Code 39
2.8 in
7.11 cm
6.2 in
15.75 cm
5.0 mil
Code 128
2.3 in
5.84 cm
8.7 in
22.10 cm
5.0 mil
PDF417
3.0 in
7.62 cm
8.1 in
20.57 cm
6.67 mil
PDF417
2.2 in
5.89 cm
10.6 in
26.92 cm
10. mil
Data Matrix
2.4 in
6.10 cm
10.6 in
26.92 cm
100% UPCA 1.6 in
4.06 cm
Note 2
21.6 in
54.86 cm

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C