Zebra MC33 Series Integrator Guide

Accessories
86
Lanyard
The lanyard is an optional accessory for holding the MC33XX and is comprised of multiple pieces. The lanyard can
be worn using the cross-body strap, or it can be worn on the belt, after removing the cross-body strap.
Figure 68 Lanyard
Install Lanyard on MC33XX
To install the lanyard on the MC33XX:
1. Thread the tab of the Device to Retractor Interface through the slot at the bottom of the MC33XX.
Cross-body Strap
Strap Extender
Shoulder Pad
Retractor
Device to Retractor
Interface
Quick Release Button
Retractor to Strap
Interface
Belt Clip
Lanyard Cord

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C