Zebra MC33 Series Integrator Guide

USB Communication
92
6. Copy or delete photos as required.
Disconnect from the Host Computer
To disconnect the MC33XX from the host computer:
1. On the host computer, unmount the device.
2. Remove the USB Charge cable from the MC33XX or remove the MC33XX from the 1-Slot Charge cradle.
CAUTION:Carefully follow the host computer’s instructions to unmount the microSD card and disconnect
USB devices correctly to avoid losing information.

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C