Zebra ZXP Series 3 Service Manual

2: Installation and Setup
Changing the Printer Driver Options
P1061317-002 Zebra ZXP Series 3 Card Printer Service Manual 47
Firmware Download
This option is used to install the firmware downloaded from the Zebra web site at
www.zebra.com under Drivers & Downloads.
Step 1. Download the firmware from Zebra web site (www.zebra.com), and save it to a
location you can easily find.
Step 2. In the Tools window, click on the Select File button.
Step 3. From the Browse window, “find” and select the firmware file (BIN file type) you
downloaded in Step 1; and click on the Open button.
Step 4. Click on the Start Firmware Download button to install the firmware.
Step 5. Wait while the firmware downloads and installs, and then wait while the printer resets
and initializes.
Step 6. When the installation is complete, the Status field will display Firmware
Downloaded Successfully.
Important • Do not turn off the power to the printer until the process is done and the OCP
displays READY. If the download process is interrupted, the printer will not operate.

Zebra ZXP Series 3 Specifications

General

Color	No
Card size	54 x 86 mm
Card types	Magnetic stripe (ISO 7811), PVC, PVC Composite, Smart card
Card feeder	Yes
Print technology	Dye-sublimation
Maximum resolution	300 DPI
Print speed (color)	180 card/h
Print speed (monochrome)	750 card/h
Printing media thickness	762 µm
Duplex print speed (color)	140 card/h
Display	LCD
Certification	FCC, CE, UL, CUL
Product color	Grey, White
Internal memory	32 MB
Built-in barcodes	EAN13, EAN8, Interleaved 2/5, PDF417, UPC-A
Total input capacity	100 sheets
Display number of characters	16
Compatible operating systems	Windows
Storage temperature (T-T)	-5 - 70 °C
Operating temperature (T-T)	15 - 30 °C
Storage relative humidity (H-H)	20 - 70 %
Operating relative humidity (H-H)	20 - 65 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Interface	USB
Optional connectivity	Ethernet, USB 2.0

Weight and Dimensions

Weight	5530 g
Dimensions (WxDxH)	201 x 368 x 309 mm