ChemStation Workflow 25
Data Analysis
3
Data Analysis: Data Review
Figure 11 Keep the Current Method for Data Review
You can use this option for example in the following workflows:
• You want to review the data files of sequence container with a different
method that is not currently in the container, e.g. a master method not
used for acquisition because your workflow employs separate
acquisition and data analysis methods. At the start of the review you
load this different master method, most conveniently from the Method
tab of the ChemStation Explorer.
• In the online session, you want to edit the master method used for
acquiring the data container. You want to edit both instrument
parameters and data analysis parameters as immediate starting point
for the next acquisition sequence run.
• You have edited the data analysis parameters of the individual method
DA.M for one of the runs in your sequence containers. With the option
Current Method you can review all runs with this method, in order to
check how well these parameters also apply for other runs.
To Next Page
Loading...
Need help?
General
