2 General Power Meter Functions
84 N1911A/1912A P-Series Power Meters User’s Guide
Average mode
This feature is applicable for 8480 Series, N8480 Series, E- Series E4410,
E- Series E9300, E- Series E9320 or P- Series N1920 sensor when connected.
Below are examples of SCPI commands when used in average mode. Send
the SCPI commands below to meter using remote interface.
• SENS:DET:FUNC AVER
• TRIG:SOUR EXT
• SENS:FREQ:START 50 MHz
• SENS:FREQ:STOP 4 GHz
• SENS:FREQ:STEP 2048
Optional measurement configurations:
• OUTP:TRIG ON
• SENS:MRAT DOUB
• SENS:AVER:COUN 128
• INIT:CONT ON
• *OPC
• *ESR?
• FETC?
To Next Page
Loading...
