NTP Information Menu
Page 12-22
Reference time. This is the local time at which the local clock was last set or corrected.
System Flags. This counter lists what flags have been configured for this NTP entity. For more
information about setting flags, see Set a System Flag (Auth, Bclient, Monitor, Stats) on page
12-35.
Frequency. A number indicating the local clock’s frequency in relation to a reference clock’s
Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should
be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time differ-
ence.
Stability. The residual frequency error (in seconds) remaining after the system frequency
correction is applied.
Broadcastdelay. The broadcast delay, in seconds, of this association. For information on how
to set the broadcast delay, see Configuring a Broadcast Time Service on page 12-13.
Authdelay. The authentication delay, in seconds, of this association. For information on how to
set the authentication delay, see Set the Delay Added to Encryption Time Stamps on page 12-
33.
To Next Page
Loading...
Need help?
General
