The Frame Relay Software Menu
Page 29-21
The Frame Relay Software Menu
User interface commands for Frame Relay are on a separate menu that you can access
through the fr command. The Frame Relay menu is a sub-menu of the Interface/WAN menu.
Typing fr at any system prompt displays the following menu:
Command Frame-Relay Menu
----------------------------------------------------------------------------------------------------------------------
frstatus Status of entire chassis, slot, port, and DLCI (e.g., 4/1/32).
frview View a given slot, port, or DLCI (e.g., 4/1/32).
frmodify Modify a given slot, port, or DLCI (e.g., 4/1/32).
frdelete Delete a given port or DLCI (e.g., 4/1/32).
fradd Add a DLCI with slot, port, DLCI (e.g., 4/1/32)
Main File Summary VLAN Networking
Interface Security System Services Help
You can start any of the commands by typing just the first three (3) letters of the command
name. For example, to use the frview command you could type only frv.
The following sections describe the use of commands on the Frame Relay menu.
To Next Page
Loading...
