Alcatel Omni Switch/Router User Manual

Overview of Command Interfaces
Page 4-3
Exit the Command Interface
To exit your current session with the switch from the CLI or the UI mode, type either quit or
logout at the prompt, then press <Enter>. Your session is immediately terminated.
♦ Note ♦
If you forget which command interface mode you are
in, type the
? character. If you are in the UI mode, the
Main Menu will display as shown above. If you are in
the CLI mode, the switch will show the following
display.
^NO, SHOW, VOICE, SYSTEM, ACCOUNTING, . . .
->

Alcatel Omni Switch/Router Specifications

General

Brand	Alcatel
Model	Omni Switch/Router
Category	Network Router
Language	English