Displaying Link Status
Page 31-15
Displaying Link Status
The linkstatus command is used to display the operational status of WAN Links.
Displaying Status for All WAN Links
To view information on all WAN Links, enter the following command:
linkstatus
A screen similar to the following displays:
Link Peer
Idx Id Slot/Port Last Setup Time
==== ===== ======== ==============
1 1 4/2 00:00:00 03/97
2 2 4/2 00:00:00 03/97
Active Session:
Setup Link Peer Peer Conn. Call Call
Time Index Id Call Addr. Time St. Org.
==== ===== ==== ============ ===== ==== ====
00:00 1 1 8188783500 00:00 CON ANS
00:00 2 1 8188783500 00:00 CON ANS
The fields on this screen have the following meanings:
Link Index
The number assigned to identify this WAN Link.
Peer ID
The number assigned to the PPP Entity that is related to a WAN Link (indicated by Link
Index).
Slot/Port
The slot and port numbers associated with a given Link Index and Peer ID.
Last Setup Time
The value of “sysUpTime” (the time of day recorded by the switch) when the last call to this
peer was started. For ISDN, this will be the time when the setup message was received from
or sent to the network. This field will be updated whenever a call is started or answered.
Active Session
The following information is available for the active ISDN session, if one is in progress:
Setup Time
The value of “sysUpTime” (the time of day) when the call to this peer was started.
Peer Id
The Peer ID that is related to this active ISDN session.
To Next Page
Loading...
Need help?
General
