Viewing WAN Links
Page 31-14
Example of WSX Serial or T1/E1 Link
An example of a link over a WSX serial or Fractional T1/E1 port would look like this:
View ISDN Link configuration. Index: 2 Link Peer ID: 3
Type: WSM port Slot: 5 Port: 2
1) Link Description : Link Entry: 1, Peer ID: 1
{Enter text up to 31 characters}
2) Link Administrative Status . . . . . . . . . . . . . . . . . . . . . . . . . . = Enabled
{(E)nabled, (D)isabled}
The fields on this screen provide the same information as those on the linkadd screen. See
Adding a WAN Link on page 31-3 for descriptions of each of these fields.
To Next Page
Loading...
Need help?
General
