EasyManua.ls Logo

Alcatel Omni Switch/Router - Gigabit Ethernet Modules; Gsx-K-Fm;Fs;Fh-2 W

Alcatel Omni Switch/Router
1100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gigabit Ethernet Modules
Page 3-12
Gigabit Ethernet Modules
Gigabit Ethernet connections can be used as network backbones or in a wiring closet. The
following Omni Switch/Router Gigabit Ethernet modules are available:
GSX-K-FM/FS/FH-2W Advanced switching module with two (2) Gigabit Ethernet back-
bone connections using fiber (SC) connectors.
This module is described and illustrated in the following sections.
Note
Wait at least five (5) seconds after a cable is pulled
from a
GSX module before reinserting it. This will
prevent packets from being dropped.
GSX-K-FM/FS/FH-2W
The GSX-K-FM/FS/FH-2W Gigabit Ethernet backbone switching module contains two fiber SC
connectors that support two fully switched 1000Base-LX (long-distance fiber transmissions) or
1000Base-SX (short-distance fiber transmission ports). The GSX-K-FM/FS/FH-2W can be used as
a backbone connection in networks where Gigabit Ethernet is used as the backbone media.
The
GSX-K-FM/FS/FH-2W can be factory configured with intermediate-reach single mode or
multimode fiber ports (see GSX-K-FM/FS/FH-2W Technical Specifications on page 3-13 for
more information). The intermediate-reach single mode version is referred to as the GSX-K-FS-
2W; the long-reach single mode version is referred to as the GSX-K-FH-2W; and the multimode
version is referred to as the GSX-K-FM-2W.
The ports are color coded to differentiate the mode: multimode connectors are black, long-
haul single mode connectors are yellow, and intermediate-reach single mode connectors are
blue. (See Handling Fiber and Fiber Optic Connectors on page 3-10 for proper handling of SC
connectors and fiber-optic cable.)
The
GSX-K-FM/FS/FH-2W takes advantage of new Gigabit Ethernet/Fast Ethernet ASIC technol-
ogy known as “Kodiak.” This module provides 4 priority levels and 256 queues per Kodiak
ASIC.
Note
Kodiak-based modules support up to 4 levels of prior-
ity (0-1, 2-3, 4-5, 6-7). This is not compatible with the
implementation of VLAN priority of Mammoth-based
modules. Kodiak based priority VLANs can only be
used with other Kodiak based priority VLANs.
With the optional
HRE-X you can increase routing performance to 1.5 million packets per
second per module and up to 12 Mpps in a fully-loaded 9-slot chassis.

Table of Contents

Related product manuals