Boot Prompt Basics
Page A-6
Saving Configuration Changes (S)
To save any changes to the configuration parameters, enter the S command at the prompt.
The following message appears to confirm when the process is complete:
Saving boot information...done
[Boot]:
Viewing Version Number (V)
To view the version number of the bootstrap shell, enter the V command at the prompt.
♦ Important Note ♦
Some of the options within the Boot Line configuration
menu are for programmer’s internal debugging
purposes or for Customer Service diagnostics. Alcatel
does not recommend that you invoke any menu
options not described in this section.
To Next Page
Loading...
Need help?
General
