Operational Problems
Page 35-8
Protocol Problems
You may notice an abnormal number of errors in a particular protocol. You can view proto-
col errors by using the networking commands. Refer to Chapter 25, “IP Routing,” for more
information on the networking commands.
Probable Cause
Incompatible versions of the protocol are running on stations in the network.
Solution
Check the version of the protocol and verify that you are using the same version on all
stations in the network. For example, you may be required to run Spanning Tree, Revision C
on all stations.
Also, check the parameter values that you set for the protocol.
To Next Page
Loading...
Need help?
General
