Flushing the IPX RIP/SAP Tables
Page 27-15
Flushing the IPX RIP/SAP Tables
The ipxflush command is used to flush the IPX RIP Routing and SAP Bindery Tables.
Follow the steps below to flush both the IPX tables.
1. Enter
ipxflush.
A screen similar to the following displays:
Flush tables (RIP routing and SAP bindery) in:
{ RIP and SAP(b),
RIP only(r),
SAP only(s)} (b) :
2. Enter b (or just press Enter) to flush both tables. Enter r to flush just the Routing Table.
Enter s to flush just the SAP Bindery Table.
You will be returned to the system prompt.
To Next Page
Loading...
