The ISDN Submenu
Page 32-3
The ISDN Submenu
The WAN menu contains a submenu, ISDN, containing commands specific to WSX-BRI ISDN
ports.
To switch to, and to display, the
ISDN menu, enter the following commands:
ISDN
?
A screen similar to the following displays:
Command ISDN Menu
----------------- ---------------------------------------------------------------------------
isdnm Modify an existing ISDN port’s configuration
isdnd Delete an existing ISDN configuration entry
isdnv View an existing ISDN configuration entry
isdns Status for the ISDN configuration entry
Main File Summary VLAN Networking
Interface Security System Services Help
Switch Configuration
This section describes how to configure the ISDN ports on WSX-BRI boards. You use the
isdnm command to modify the configuration of an ISDN port. You must select the correct
type of telephone switch to which you will be making your ISDN calls, as well as supply
signalling calling addresses (phone numbers) and SPIDS, if required. Configuration is
described in the next section, Modifying an ISDN Configuration Entry on page 32-4.
The other commands on the ISDN submenu are described in the remaining sections of this
chapter.
To Next Page
Loading...
Need help?
General
