Viewing T1/E1 Local Statistics
Page 33-19
Viewing Local Historical Statistics
The telis command allows you to display historical statistics for the past 96 15-minute inter-
vals. Enter the following command
telis <slot>/<port>
where <slot> is the slot number where the board is located, and <port> is the port number on
the board on which you want to view statistics. For example, to view historical 15-minute
interval statistics for Port 2 on the board in slot 5, enter
telis 5/2
A screen similar to the following displays:
Local 15-minute Interval Statistics for port 2 on slot 5
Circuit Identifier : Alcatel T1 Circuit
Valid Intervals : 5 of 96 Elapsed Time : 440 of 900
Intv# ES SES BES UAS SEFS LES CSS PCV LCV
===== ====== ====== ====== ====== ====== ====== ====== ====== ======
1 0 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
Definitions of the fields and columns in this display are the same as those used for the telts
command. See Viewing Total Local Statistics on page 33-17 for an explanation of these statis-
tics.
To Next Page
Loading...
