Deleting WAN Links
Page 31-11
Deleting WAN Links
The linkdelete command is used to delete one or more existing WAN Link records.
Note
Before you can delete a PPP Entity, you must first
delete all WAN Links that have been associated with it.
See Deleting a PPP Entity in Chapter 30 for complete
information.
1. To delete an existing WAN Link, for example, Link Index 2, you would enter the follow-
ing command:
linkdelete L2
A screen similar to the following displays:
This will delete the configuration for Link Peer ID: 3 Link Index: 2
Continue ? {(Y)es, (N)o} : N
2. If you wish to delete this link, enter y and press Enter. If you wish to abort the deletion,
just press Enter to accept the default answer of “No.”
The system prompt will then reappear.
To Next Page
Loading...
