Alcatel Omni Switch/Router - Viewing RIP and SAP Timers

Configuring RIP and SAP Timers
Page 27-36
Viewing RIP and SAP Timers
To view the RIP and SAP timers that have been configured through the ipxtimer command,
enter the following command:
ipxt
A screen similar to the following displays:
# Group RIP Timer (secs) SAP Timer (secs)
=== ====== ============== ===============
1 1 30 15
2 global 45 45
The fields are defined as follows:
Group
Displays the group number or
global to indicate all groups.
RIP Timer (secs)
Displays the RIP timer configured for the group using the
ipxtimer command.
SAP Timer (secs)
Displays the SAP timer configured for the group using the
ipxtimer command.