V16Pro Page 112
Firmware
The V16Pro’s operating system is called ScriptOS. It is stored in internal memory.
Occasionally we publish updates, which are available for free download on our website.
The procedure for updating the OS is as follows:
1. Unplug the power cable from the back of the unit.
2. Obtain the OS.NEW file from our web site or from customer service.
3. Copy the OS.NEW to a flash card. This file should be the only file on the card.
4. Insert the flash card into the slot in the back of the unit.
5. Reconnect the power cable.
6. The unit will begin the procedure of updating the OS automatically. The display will
show "Updating Firmware" followed by a series of numbers showing the progress.
7. The update finishes with the "Update Complete" and will rename the OS.NEW to
OS.SAV. To re-flash the unit the OS.SAV must be renamed back to OS.NEW to
restart the process.
Show Memory
When scripts are compiled and sent to the V16Pro, the data is stored in the rear-panel
accessible Compact Flash card. The smallest Compact Flash card made will
accommodate about a hundred copies of the largest script ever written, so it won’t be
necessary to upgrade this memory! Finally something that’s not bigger, costs more or you
have to order.
To Next Page
Loading...