Show Controller External Control Page 56
Show Controller External Control
Many methods exist for sending commands to your show controller to start sequences. Several common
methods are listed below.
"ShowTouch" Software (For PC, iPhone, iPad)
ShowTouch is a rugged touch-screen interface designed to work exclusively with with our Ethernet show
controllers. The script running on the show controller is read by the Touch software so that buttons,
toggles, and text displays can be linked to the show controller quickly and easily. The Touch software that
runs on ShowTouch will also run on any Windows PC, and it's free!
When using the "ShowTouch" software, no additional setup is required in WinScriptLive. Simply run the
touch software and retrieve the script from the V16/V4Pro. Buttons can be easily added to start and monitor
sequences.
Ami-Terminal Control
Ami-Terminal is a serial, USB or Ethernet client software that can connect and send simple commands to
the V16Pro.
It can be launched from the "Tools" menu in WinScript Live.
All commands available to control the V16Pro are displayed with easy to use buttons. No additional setup
in the Script is required.
To Next Page
Loading...