Alcorn Mcbride V16Pro - Timecode (LTC, SMPTE, EBU) and Internal Time Events; Delay; Timecode Set; Timecode Pause

WinScript Live Command Reference Page 81
WinScript
Reference
Timecode (LTC, SMPTE, EBU) and Internal Time Events
Timecode (LTC, SMPTE, EBU) related events perform function on the single, global timecode source for
unit. Other time related events such as "Get Seq Time" and "Delay" reference a specific sequence clock.
To Do This…
Use This Event…
Wait a specific amount of time in a non-timed sequence
Delay
Sett SMPTE/EBU Timecode to a specific time
Timecode Set
Start SMPTE/EBU Timecode Running
Timecode Start
Stop SMPTE/EBU Timecode
Timecode Stop
Pause SMPTE/EBU Timecode
Timecode Pause
Stop SMPTE/EBU Timecode at next loop point
Timecode Stop Loop
Get a current sequence time (internal clock) in a
variable
Get Seq Time
Allow SMPTE/EBU Timecode jam-synced sequence to
be run.
Arm
Prevent a SMPTE/EBU Timecode jam-synced sequence
from being run
Disarm
Delay
Causes the running sequence to delay of a specific amount of time. For use sequences where the
timecode is set to be "None."
Event Syntax
Event
Data1
Delay
Name of Timecode Variable <or> Timecode in the form
00:00:00.00
Timecode Set
Set the SMPTE/EBU Timecode to a specific value.
Event Syntax
Event
Data1
Timecode Set
Name of Timecode Variable <or> Timecode in the form
00:00:00.00
Timecode Pause
Pauses the SMPTE/EBU Timecode. Can be resumed with Timecode Start.