Alcorn Mcbride V16Pro - Disarm; Network Events; Send Mail; Number Generation

WinScript Live Command Reference Page 83
WinScript
Reference
Disarm
Disarm is similar to a sequence "Reset" command. The Sequence will ignore current SMPTE/EBU
timecode when in disarmed state. This is used when the Clock Source is set to SMPTE/EBU (see
image above).
Network Events
Send Mail
Send e-mail to a specific address using the SMTP settings defined using front panel or Terminal
interface. Currently SSL is not supported.
Event Syntax
Event
Data1
Data2
Data3
Send Mail
The email address to send
the email to. This value
must be enclosed with <
and > such as
<nameto@email.com>
The subject of the
email message in
quotes
The body of the
email message in
quotes
Number Generation
Get Random
Get a random integer number and save it to a variable
Event Syntax
Event
Data1
Data2
Data3
Get Random
A variable
name
The minimum value
for the random
number (optional:
default is variable's
minimum)
The maximum value for
the random number
(optional: default is
variable's maximum)