Alcorn Mcbride V16Pro - US; PW; SD

Serial and Ethernet Control Page 156
US Get/Set User Name
Description: This command will get or set the user login name.
Comments: The default name is admin.
Get command: US<0D>
Message Response: (current login)<0D>
Example: Send Command: US<0D>
Response: admin<0D>
Set command: (new login)US<0D>
Message Response: R<0D>
Example: Send Command: adminUS<0D>
Response: R<0D>
PW Get/Set Password
Description: This command will get or set the password.
Comments: The default password is password.
Get command: PW<0D>
Message Response: password<0D>
Example: Send Command: PW<0D>
Response: currentpassword<0D>
Set command: (new password)PW<0D>
Message Response: R<0D>
Example: Send Command: passwordPW<0D>
Response: R<0D>
SD Get/Set DST Enable
Description: This command will get or set the status of the daylight saving time parameter.
Comments: 0 = Standard Time, 1 = using DST.
Get command: SD<0D>
Message Response: current setting<0D>
Example: Send Command: SD<0D>
Response: 1<0D>
Set command: 1SD<0D>
Message Response: R<0D>