V16Pro Page 94
address conflicts arise or when testing show configurations apart from an
operating show.
You may control a networks using one of the Ethernet ports located on the
backside of the unit in the lower right corner as viewed from the back. Each port
has a different IP address and may be changed by the front panel menu wheel
control.
Display
The V16Pro includes a standard 8x40 Backlit VFD Display. When the V16Pro is in startup
or configuration mode, the display will show setup parameter menus and feedback
controlled by the menu wheel. When in the show control mode, the display may be
configured to give up to 8 lines of text as needed. WinScript Live will provide the show
producer with simple but powerful control of what is shown in the display.
To Next Page
Loading...