WinScript Live Resources Page 30
Buttons
Buttons refer to the front panel buttons found on the show controller. By default, these buttons are not the
same as the rear inputs. Checking the “Couple” box causes a press of the button to have the same effect as
a rear pulse on the corresponding input. For example, checking “Couple” on “Button1” will cause any
triggers relating to “Input1” to occur when “Button1” is pressed.
Triggers
Triggers are a method to start or stop a particular sequence. Multiple triggers can be added for a single
sequence.
Clicking on the Triggers button on any toolbar will allow you to view or edit all triggers in
your show.
To Next Page
Loading...