Alcorn Mcbride V16Pro - SJ; SA

Serial and Ethernet Control Page 164
Get command: pDH<0D>
Message Response: x<0D>
Example: Send Command: ADH<0D> (returns port A status)
Response: 1<0D>
Set command: xpDH<0D>
Message Response: R<0D>
Example: Send Command: 1ADH<0D> (enables port A)
Response: R<0D>
SJ Get/Set the Ethernet Port for SMTP
Description: This command will get or set the show controller Ethernet port used to contact
the SMTP server.
Comments: A = port A, B = port B. The default port is A
Get command: SJ<0D>
Message Response: (current port)<0D>
Example: Send Command:SJ<0D>
Response: A<0D>
Set command: (port A or B)SJ<0D>
Message Response: R<0D>
Example: Send Command: ASJ<0D>
Response: R<0D>
SA Get/Set the SMTP Address
Description: This command will get or set the SMTP address.
Comments: A text string such as mail.alcorn.com
Get command: SA<0D>
Message Response: (current address)<0D>
Example: Send Command: SA<0D>
Response: mail.alcorn.com<0D>
Set command: (new address)SA<0D>
Message Response: R<0D>
Example: Send Command: mail.alcorn.comSA<0D>
Response: R<0D>