Alcorn Mcbride V16Pro - Page 148

WEB Server Quick Start Page 148
Name
Params
Description
page to load when no
page is specified by a
request
setcustauth
1. The customer user name
2. The customer password
Set the customer user
name and password for
the HTTP server login
Date/Time Settings
settime
1. The time.
See $_SERVER["time"] for
formatting.
Set the current time
setdate
1. The date.
See $_SERVER["date"] for
formatting.
Set the current date
setntpjack
1. The Ethernet jack.
Set to "A", "B", or
"disabled"
Set the Ethernet jack to
use for NTP
setntpserver
1. The ntp server name or IP
address
Set the NTP server name
or IP address
Network Settings
setdns
1. The Ethernet port.
Set to "A" or "B"
2. IP address of the DNS
server
Set the DNS server for the
specified Ethernet port
setnetwork
1. The Ethernet port.
Set to "A" or "B"
2. IP address
3. Subnet Mask
4. Gateway
Set the IP Address,
Subnet Mask, and
Gateway for the specified
Ethernet port
setdhcp
1. The Ethernet port.
Set to "A" or "B"
2. Set to "enabled" or
"disabled"
Set whether to use DHCP
for the network and DNS
settings instead of static
values for the specified
Ethernet port
System
restart
None
Immediately restart the
show controller
savesettings
None
Save all changes to
Settings so that they will
remain the next time the
show controller is
restarted.