Allen-Bradley PowerFlex 6000 - Page 112

112 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
Current Stability Loop Enable
Linear Number: P038
Default Value: 0
Minimum Value: 0
Maximum Value: 1
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter is used to enable or disable the Current Stability Loop function.
Current Stability Loop Enable Frequency Range1 Upper Limit
Linear Number: P039
Default Value: 30
Minimum Value: 0
Maximum Value: 100
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the upper limit for Current Stability Loop Enable Frequency
Range.
Current Stability Loop Enable Frequency Range2 Upper Limit
Linear Number: P069
Default Value: 80%
Minimum Value: 0%
Maximum Value: 100%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the upper limit for Current Stability Loop Enable Frequency
Range2.
Current Stability Loop Frequency Range2 Output Scaling Factor
Linear Number: P070
Default Value: 0%
Minimum Value: 0%
Maximum Value: 100%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the scaling factor for Current Stability Loop Frequency
Range2 Output.
Value Description
0 Disable Current Stability Loop
1 Enable Current Stability Loop