Allen-Bradley PowerFlex 6000 - HMI Display Parameters

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 55
Parameter Descriptions Chapter 2
User Analog Set-point Switch
Linear Number: P494
Default Value: 0
Minimum Value: 0
Maximum Value: 3
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the User Analog Set-point Switch.
HMI Display Parameters
Rated Frequency HMI Display Filter Time
Linear Number: P351
Default Value: 100 ms
Minimum Value: 0 ms
Maximum Value: 32767 ms
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Rated Frequency HMI Display Filter Time.
Rated Frequency HMI Display Integer Part
Linear Number: P352
Default Value: 50
Minimum Value: 0
Maximum Value: 75
Access Level: User, Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the integer part for Rated Frequency HMI Display.
Rated Frequency HMI Display Decimal Part
Linear Number: P353
Default Value: 0
Minimum Value: 0
Maximum Value: 1000
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the decimal part for Rated Frequency HMI Display.