Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 95
Parameter Descriptions Chapter 2
Maximum Output Frequency
Linear Number: P466
Default Value: 50
Minimum Value: 0
Maximum Value: 75
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter sets the Maximum Output Frequency.
Over Speed Enable
Linear Number: P467
Default Value: 0
Minimum Value: 0
Maximum Value: 1
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter is used to enable or disable the Over Speed function.
Voltage Sag Parameters
Derating Function Enable
Linear Number: P182
Default Value: 1
Minimum Value: 0
Maximum Value: 1
Access Level: R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter is used to enable or disable the derating function.
Value Description
0 Disable Over Speed
1 Enable Over Speed
Value Description
0 Disable Derating Function
1 Enable Derating Function
To Next Page
Loading...
