Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

62 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
Frequency Command Upper Limit
Linear Number: P415
Default Value: 100
Minimum Value: -100
Maximum Value: 100
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the upper limit for Frequency Command.
Rated Output Frequency
Linear Number: P460
Default Value: 50
Minimum Value: 0
Maximum Value: 75
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter sets the Rated Output Frequency.
Maximum Output Frequency
Linear Number: P466
Default Value: 50
Minimum Value: 0
Maximum Value: 75
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter sets the Maximum Output Frequency.
Over Speed Enable
Linear Number: P467
Default Value: 0
Minimum Value: 0
Maximum Value: 1
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter is used to enable or disable the Over Speed function.
Value Description
0 Disable Over Speed
1 Enable Over Speed

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English