Allen-Bradley PowerFlex 6000 - Restart Parameters

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 125
Parameter Descriptions Chapter 2
Restart Parameters
Restart Enable
Linear Number: P461
Default Value: 0
Minimum Value: 0
Maximum Value: 1
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter is used to enable or disable the Restart function.
Fault Reset Timeout
Linear Number: P462
Default Value: 120.00 s
Minimum Value: 0.04 s
Maximum Value: 120.00 s
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Fault Reset Timeout.
Power Cell Fault Auto Reset Delay
Linear Number: P465
Default Value: 4 s
Minimum Value: 0 s
Maximum Value: 10 s
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Power Cell Fault Auto Reset Delay.
Value Description
0 Disable Restart
1Enable Restart