Allen-Bradley PowerFlex 6000 - Load Loss Control Parameters

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 117
Parameter Descriptions Chapter 2
Load Loss Control Parameters
Load Loss Control Enable
Linear Number: P045
Default Value: 0
Minimum Value: 0
Maximum Value: 1
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter is used to enable or disable Load Loss Control.
Load Loss Enable Frequency
Linear Number: P046
Default Value: 20%
Minimum Value: 0%
Maximum Value: 100%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Load Loss Enable Frequency.
Load Loss Control Differential Scaling
Linear Number: P047
Default Value: 8%
Minimum Value: 0%
Maximum Value: 2000%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Load Loss Control Differential Scaling.
Load Loss Frequency Compensation Upper Limit
Linear Number: P048
Default Value: 5%
Minimum Value: 0%
Maximum Value: 5%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the upper limit for Load Loss Frequency Compensation.
Value Description
0 Disable Load Loss Control
1 Enable Load Loss Control