Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

72 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
Analog Input Parameters
Line Voltage Uab Scaling Factor
Linear Number: P151
Default Value: 153.0% (2.3 kV), 146.7% (2.4 kV),
175.9% (3.0 kV), 159.9% (3.3 kV),
175.8% (4.0 kV), 169.0% (4.16 kV),
146.5% (6.0 kV), 167.4% (6.3 kV),
159.8% (6.6 kV), 152.8% (6.9 kV),
158.1% (10.0 kV)
143.7% (11.0 kV)
Minimum Value: 0.00%
Maximum Value: 199.99%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Line Voltage Uab Scaling Factor.
Line Voltage Ubc Scaling Factor
Linear Number: P152
Default Value: 153.0% (2.3 kV), 146.7% (2.4 kV),
175.9% (3.0 kV), 159.9% (3.3 kV),
175.8% (4.0 kV), 169.0% (4.16 kV),
146.5% (6.0 kV), 167.4% (6.3 kV),
159.8% (6.6 kV), 152.8% (6.9 kV),
158.1% (10.0 kV)
143.7% (11.0 kV)
Minimum Value: 0.00%
Maximum Value: 199.99%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Line Voltage Ubc Scaling Factor.
Line Voltage Ung Scaling Factor
Linear Number: P153
Default Value: 100.00%
Minimum Value: 0.00%
Maximum Value: 199.99%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Line Voltage Ung Scaling Factor.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English