Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 111
Parameter Descriptions Chapter 2
Current Stability Loop
Parameters
Current Stability Loop Filter Time
Linear Number: P034
Default Value: 63
Minimum Value: 0
Maximum Value: 32767
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the filter time for Current Stability Loop.
Current Stability Loop Frequency Range1 Output Scaling Factor
Linear Number: P035
Default Value: 15
Minimum Value: 0
Maximum Value: 100
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the scaling factor for Current Stability Loop Frequency
Range1 Output.
Current Stability Loop Output Upper Limit
Linear Number: P036
Default Value: 10
Minimum Value: 0
Maximum Value: 100
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the upper limit for Current Stability Loop Output.
Current Stability Loop Output Lower Limit
Linear Number: P037
Default Value: -10
Minimum Value: -100
Maximum Value: 100
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the lower limit for Current Stability Loop Output.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English